PLC Control System on Jetty Flow
QAFCO
Brief Description
Qatar Fertilizer Company – (QAFCO) at Mesaieed in State of Qatar needed to replace existing LV switchboard 4.9 for Jetty-1. The scope of work included the detailed design, development, supply and commissioning of the PLC based system for their MCC control for Jetty Flow Switch Gear. Control design was based on Rockwell Automation/Allen Bradley’s ControlLogix Programmable Automation Controllers / Adapters and flex I/Os.The challenge of the project included to provide PLC based control system solution.
Design, engineering, supply, installation & commissioning of PLC/HMI system at TS & PS sites
Panel Manufacturing for TS & PS sites
Integrated FAT (for complete solution offered)
RTU configuration, assembly, testing and supply of RTU panels
Installation of complete hardware
Commission of all BV and CP sites along with assistance at MCC & AMCC
Avanceon provided with a full design, development, installation and commissioning of the QAFCO PLC Control System on Jetty Flow Switch Gear Functional Requirement Specificiation.
The entire PLC I/O was connected through interposing relay with LED indication. Further presently there were a total three hooter for all four conveyors. However, new logics were based on separate hooter for each conveyor so the pre-start of each conveyor to be identified separately.
Theontrol was designed with Rockwell Automation/ Allen Bradley’s ControlLogix Programmable Automation Controllers/ Adapters and flex I/Os. The scope specific to the PLC for switchboard 4.9 for the jetty included the following four conveyors, namely no 23A, 23B, 24 and 25.
- Project Scope
-
Design, engineering, supply, installation & commissioning of PLC/HMI system at TS & PS sites
Panel Manufacturing for TS & PS sites
Integrated FAT (for complete solution offered)
RTU configuration, assembly, testing and supply of RTU panels
Installation of complete hardware
Commission of all BV and CP sites along with assistance at MCC & AMCC - Solution
-
Avanceon provided with a full design, development, installation and commissioning of the QAFCO PLC Control System on Jetty Flow Switch Gear Functional Requirement Specificiation.
The entire PLC I/O was connected through interposing relay with LED indication. Further presently there were a total three hooter for all four conveyors. However, new logics were based on separate hooter for each conveyor so the pre-start of each conveyor to be identified separately.
Theontrol was designed with Rockwell Automation/ Allen Bradley’s ControlLogix Programmable Automation Controllers/ Adapters and flex I/Os. The scope specific to the PLC for switchboard 4.9 for the jetty included the following four conveyors, namely no 23A, 23B, 24 and 25.
Clients' Review
“Avanceon has been very co-operative & supportive during the complete QAFCO FAT.
The technical thoroughness helped to get the PLC panel cleared from dispatch in a single attempt.
The entire project was very well coordinated including the synchronization of its deliverables, which ensures its level of correctness and timeliness.”